LEGRAND D45 SYSTEM, Installation Manual, Page: 235 / 254

231
25/11/2013 BT00792-a-
323017 Lift control interface
(M = 2 to 9) meaning of the configurators :
(M = 2 to 9) Configuration example 3 :
System with : 2 entrance panels in the underground floor, 3 entrance panels in the 1.st floor. Floors 2 to 9 are “PRIVATE” floors and each floor has 4 apartments.
By setting delay time to 20 seconds (CF7 = 2), the configuration values of the two interfaces will be as follows :
Configuration
WARNING
- The relationship between CF(N) and CF(N+1) should meet the rule : CF(N+1) = CF(N) or CF(N+1) = CF(N) + 1
- The configuration value indicate the output channel of the entrance panel address
- Using configuration MODE (M=2 to 9),each channel correspond to one entrance panel address. The entrance panel address can be calculated by the following rule : A=(M-2) x 7 + N.
A means Entrance Panel address, M means MODE, N means configuration place such as CF1 means N=1. The phisical configuration value means the channel number.
WARNING
By this configuration method, DEVICE 1 (OUTPUT 1) will manage the 2 entrance panels (EP with address 1 and 2) of the underground floor; DEVICE 1 (OUTPUT 2) will manage the 3
entrance panels (EP with address 3 to 5) of the 1.st floor; DEVICE 2 (OUTPUTS 1 to 8) will manage the “PRIVATE” floors 2 to 9.
en
CONFIGURATION PLACE CONFIGURATION VALUE
CF1 (N=1) The corresponding OUTPUT channel
CF2 (N=2) The corresponding OUTPUT channel
CF3 (N=3) The corresponding OUTPUT channel
CF4 (N=4) The corresponding OUTPUT channel
CF5 (N=5) The corresponding OUTPUT channel
CF6 (N=6) The corresponding OUTPUT channel
CF7 (N=7) The corresponding OUTPUT channel
M M=2–9
CF1 CF2 CF3 CF4 CF5 CF6 CF7
M=2 1 2 3 4 5 6 7
M=3 8 9 10 11 12 13 14
M=4 15 16 17 18 19 20 21
M=5 22 23 24 25 26 27 28
M=6 29 30 31 32 33 34 35
M=7 36 37 38 39 40 41 42
M=8 43 44 45 46 47 48 49
M=9 50 51 52 53 54 55 56
CONFIGURATION PLACE CONFIGURATION VALUE
DEVICE 1 DEVICE 2
CF1 1 0
CF2 1 2
CF3 2 0
CF4 2 4
CF5 2 8
CF6 0 0
CF7 0 2
M 2 1