LEGRAND D45 SYSTEM, Installation Manual, Page: 220 / 254

216
323011
LAN SYSTEM1 SYSTEM2
WEP
DC V OUT GAIN
Speed Full Link Aux System
323011
323011
323010
ON
SD
1
2
3
4
ON
SD
1
2
3
4
LAN SYSTEM1
SYSTEM2
WEP
DC V OUT GAIN
Speed Full Link Aux System
323011
323005
323003
323011
323010
323010
D45/IP interface
Configuration
SET THE HANDSETS OPTION OF D45/IP INTERFACE 1
Riser Serial number Each Riser address range Lower address Higher address 323011address range
Riser 1 0 - 79
0 239 0-239 Riser 2 80 - 159
Riser 3 160 - 239
Set the handsets option of D45/IP interface 2
Riser serial number Each Riser address range Lower address Higher address 323011address range
Riser 4 240-319
240 559 240-559
Riser 5 320-399
Riser 6 400-479
Riser 7 480-559
Connect for USB download configuration.
Connect for serial port download configuration
Connect for the ethernet download configuration
D45/IP interface has three ways for its download configuration, which are respectively online download, serial port download and USB download.
other 323011 or 346890
(BT’s 2-wire system iP interface)
if the main eP is quite near to D45/iP
interface, then a power supply can be
omitted.
Interface device must be configured by using the specific software and PC connection:
Configuration example:
If the first D45/IP interface 1 connects 3 Risers (Riser 1, Riser 2 and Riser 3), the second D45/IP interface 2 will connect 4 Risers (Riser 4, Riser 5, Riser 6 and Riser 7). Each Riser should
be configured as per configuration MODE 1.
Wiring ways to install 323011
BACkBone/MAin eP
BT00459-b-en 13/05/2013