Selected Traffic Values
12. In Fig 14, on the right side of the display, additional numerical
information to the selected traffic is shown. Once a particular aircraft
is selected, relative altitude, distance, climb/descent rate and
identification of the selected target are shown. When traffic is
circling, the circling direction is shown. The units used in the display
may be configured by the user in the menu. BBMF PFLARMs are set
to feet and nm. The current zoom-level of the ‘radar’ display
(magnification) is shown in the lower left-hand corner. The displayed
value corresponds to the outer range-circle of the ‘radar’ screen. The
inner range circle is a half of the outer one.
AIL 1/16 Fig 14 ‘Radar’ view: values of selected target
13. If traffic is outside of the selected range scale, it is shown on the
edge of the display to enhance situational awareness. The range
scale can be changed by pushing the control knob and rotating it, as
shown in Fig 15.
AIL 1/16 Fig 15 High zoom scale
Climb rate of selected target
Relative altitude of selected target
Range of selected target
ID of selected target
Outer ring radius (6 km)
50% Radius (3 km)
+
1232
m
2.3
km
0.5
km
8Y
+
1.2
m
s
AIL 1/16
Page 10
UNCONTROLLED DOCUMENT - NOT FOR USE IN FLIGHT OR TO BE PRINTED
UNCONTROLLED DOCUMENT - NOT FOR USE IN FLIGHT OR TO BE PRINTED