GH-3100
Installation & Operation Manual
TP-559
Operation
Page 5-3
Revision K
March 30, 2017
5.2.2.2.2 Scrolling
If the list of menu commands is longer than 4 items, the list scrolls up or down to keep the highlighted
command in the menu area. After rotating CCW (with highlighting at the topmost item of the menu
display and with more items in the list above), the list scrolls down one place resulting in the previously
unseen menu item at the top of the view area and the highlighted item being one place from the top.
After rotating CCW and the highlighting is at the topmost item and there are no more items above, the
highlighted item will remain at the top-most position. After rotating CW (with the highlighting at the
bottom item of the menu display with more items in the list below), the list scrolls up one place resulting
with the previously unseen menu item at the bottom of the view area and the highlighted item being one
place from the bottom. After rotating CW and the highlighting is at the bottom item and there are no more
items below, the highlighted item will remain at the bottom position.
5.2.2.2.3 Function Initiation
When the knob is pressed, the highlighted command is activated. If the activation is a singular function,
the menu mode ends. If the activation is a sub-menu title, the sub-menu command list occupies the menu
area with the adjustment knob used in the same manner as the initial menu. If the highlighted menu
command is a “set” command (SET BRIGHTNESS OFFSET…, or SET CRS…), a “set” command
operational description occupies the menu area while the command is in process. Pressing the knob while
in a “set” process ends the menu mode.
5.2.2.3 Menu Item List
Entering the menu mode shows the following available menu items:
•
FAST ERECT
•
SET BRIGHTNESS OFFSET
•
FAST ALIGN
•
Set Heading…
•
NAV [ON or OFF]
•
NAV MODE…
•
SET CRS…
•
ILS [BC or NORMAL]
•
CRS AUTO CENTER
•
NAV DISPLAYS…
•
BARO TYPE…
•
IAS TAPE DIRECTION [UP or DOWN]
The trailing ‘...’ indicate sub-menu operation results after that item is activated. Table 5-1 summarizes
when Menu items are shown.
The possibility of the item being a selection depends on the configuration of the DCM-3100 module
and/or the state of the GH-3100.
5.2.2.3.1 Fast Erect
The FAST ERECT item is always in the menu item list.
5.2.2.3.2 Set Brightness Offset
The SET BRIGHTNESS OFFSET… is in the main menu item list.When the SET BRIGHTNESS
OFFSET… is activated, the Adjustment Knob is used to change display brightness.