GH-3100
Installation & Operation Manual
TP-559
Installation Checkout
Page 3-7
Revision K
March 30, 2017
2.
Select DME normal display using the GH-3100 Indicator menu and observe normal indication of the
following DME display data (refer to Figure 3-4).
•
Ground Speed in Knots (KTS)
•
Hold Annunciator (optional)
•
Slant Range Distance in Nautical Miles (NM)
•
Time-to-Station in Minutes (MIN)
3.
Turn off the DME input and observe that the DME display data is removed and replaced with
dashes.
3.2.2.2.8 FMS System Test
The following paragraphs apply only to aircraft with FMS installed and the indicator configured to
display FMS information. Multiple FMS display options are available for the GH-3100 and appearance is
dependent on FMS option included in configuration.
1.
Set up a valid FMS input to GH-3100 Indicator.
Figure 3-5: FMS Display
2.
Select FMS normal display using the GH-3100 Indicator menu and observe normal indication of the
following FMS display data (refer to Figure 3-5).
•
FMS Mode Descriptor
•
To / From Annunciation
•
Selected Course
•
Vertical Deviation
•
Distance to Waypoint
•
Left/Right Deviation
•
Bearing to Way Point
•
Message
•
Parallel Crosstrack Mode
•
Approach Mode
•
Way Point Information
3.
Turn off the FMS input and observe that the FMS display data is removed and replaced with dashes.
