GH-3100
Installation & Operation Manual
Page 1-10
General Information
TP-559
March 30, 2017
Revision K
Equipment Required Not Supplied (continued)
Connector Installation
Tools:
GH-3100, P1 Interconnect 32-pin (pin P/N MS39029/S-115).
Crimp tool and positioner/locator meeting MIL specification M22520/1-01 is
required to install pins.
Insertion:
M81969/14-02
(Amphenol Industrial)
Regular Duty Crimp Tool:
M22520/1-01
(ITT P/N 995-0001-585)
Regular Duty Positioner:
TH25
(ITT P/N 995-0001-244)
Heavy Duty Crimp Tool:
M22520/2-01
(ITT P/N 995-0001-584)
Heavy Duty Positioner:
M22520/2-08
(ITT P/N 995-0001-604)
Tools can be purchased from:
Amphenol Industrial; 40-60 Delaware Avenue; Sidney, NY 13838
Phone: 800-678-0141 Fax: 607-563-5157
Or
ITT Cannon; 1851 E. Deere Ave. ; Santa Ana, CA 92705-6500
Phone: 714.261.5300 Fax 714.575.8324
Digital Level
Required for GH-1000 and magnetometer installation.
(Manufacturer: SmartTool M-D Building Products, 92346 or equivalent).
Installation Kit (s):
Installation Kit P/N 504-1895-07 for the GH-3100. Includes the following:
•
Mounting Clamp, P/N 566-1814-04
•
Mating Connector, P/N MS3476L18-32S
•
Strain Relief Connector, P/N M85049/52S18W
Installation Kit P/N 504-1895-05 for the MAG-3000. Includes the following:
•
Mating Connector, P/N JT01RE-10-35S (SR)
Mounting Hardware:
Installer is responsible for all mounting hardware. The MAG-3000 requires
non-magnetic #6 screws, preferably brass.
Pitot Mating Connectors:
Installer responsible for obtaining mating connectors for the GH-3100.
•
Static Pressure Port : IAW MS33649-05
•
Total Pressure Port: IAW MS33649-04
