Rigging procedures
18.
(p.53) to 17 until all Kara enclosures composing the array are rigged.
19.
(Optional, for pullback conguration) Attach a KARA-PULLBACK accessory to the bottom Kara as follows: insert the
KARA-PULLBACK studs into the Kara rigging points (long studs at the back), remove the 4 bottom RBLP from the Kara
and secure by re-inserting them into the bottom yellow link holes. Attach the hook or stinger of an additional motor to
the KARA-PULLBACK shackle.
KARA-PULLBACK setup safety limits
(p.191).
20.
Raise the array to the desired height and adjust the site angle (see
(p.190)).
21.
Secure the M-BUMP to the main rigging structure using two safety slings (not included).
Kara owner's manual (EN) version 1.0
55