Stacked array options and site angle setting
Array site angle setting
The site angle of the stacked Kara array will be determined by the angle of the bottom enclosure in the range from -15°
to +5°. Install both KARA-ANGARMEX angle arm extensions (also included in the M-JACK package) to obtain angles
from -7.5° to -15°. The table below gives all possible site angles settings:
Possible site angles for stacked array
Angle selection on Kara
(angle value facing the cursor)
Resulting site angle without
angle arm extension
Resulting site angle with
angle arm extension
0°
-5°
-15°
1°
-4°
-14°
2°
-3°
-13°
3°
-2°
-12°
4°
-1°
-11°
5°
0°
-10°
7.5°
+2.5°
-7.5°
10°
+5°
—
Bottom Kara angle selection without angle arm extensions
Bottom Kara angle selection with angle arm extensions
196
Kara owner's manual (EN) version 1.0
