L-Acoustics LA-RAK, Owner'S Manual

Page: 132 / 201

Rigging procedures
4.
Lift up and turn KARA#3 arms pointing up. Put KARA#3 into the ight-case tray.
Pay attention to the tray position: both wedges must slope upwards from front to rear (refer to Flight-case
(p.25)).
FRO
NT
5.
Set angle 0° on KARA#3 as follows (repeat on both sides of the enclosure):
a) Remove the rear top R-BLP from its angle hole.
b) Slide the angle arm so as to align the cursor with angle label 0°.
c) Lock the arm in place by re-inserting the R-BLP into angle hole 0°/2°/4°.
6. Remove KARA#2 from KARA#1 by applying step 3 (p.131).
7.
Attach KARA#2 to KARA#3 as follows:
a) Lift up and turn KARA#2 arms pointing up.
b) Align the front and rear link points between KARA#2 and KARA#3.
c) Secure the link points together by removing the four KARA#2 bottom R-BLP from their
storage
holes and
reinserting them into their link holes.
8.
Set angle 0° on KARA#2 by applying step 5 (p.132).
132 Kara owner's manual (EN) version 1.0