Rigging procedures
13.
Place another M-BUMP at the rigging location and remove the 4 R-BLP. Put the M-BUMP on ARRAY#1 by aligning the
four rigging points and secure by re-inserting the 4 R-BLP.
Turn the M-BUMP so that the text of the identication plate is readable and the laser slits are directed towards
the audience.
14.
Raise the SB18 array slightly higher than ARRAY#1, place ARRAY#1 beneath it, and lower the SB18 array so as to
align its 4 rigging points with those of ARRAY#1. The bottom SB18 and the M-BUMP must be in contact.
15.
Attach the 4 rigging points between the bottom SB18 and the M-BUMP as follows (repeat for each one):
a) Remove the external T-BLP from the M-BUMP.
b) Rotate the arm out.
c) Secure to the SB18 by re-inserting the T-BLP.
16.
Raise the array to a height for which the angle arms of ARRAY#1 are within comfortable reach and remove the ight-
case from the rigging location.
74
Kara owner's manual (EN) version 1.0
