Rigging procedures
Stacking an SB18/Kara mixed array or an SB18 standalone array
Using M-BUMP
Modeling and safety
An SB18/Kara mixed array or an SB18 standalone array can be stacked directly on the ground (ground stacked array)
or onto an M-BUMP/M-BAR/M-JACK platform (platform stacked array). The gure below shows a mixed array of each
type and gives the associated conditions of use.
Ground stacked array
Platform stacked array
• To be stacked on a perfectly horizontal and regular
surface ONLY
• Provides tilt adjustments in case of slope surface
• Increases Kara array site angle range
Ground stacked arrays
A ground stacked array requires to be installed on a perfectly horizontal and regular surface. It can be composed
of a maximum of 4 SB18/9 Kara or 8 SB18 enclosures along with all loudspeakers cables (refer to
(p.26)).
Apply the setup safety limits given in the table below regarding the angle between the top SB18 and the bottom
Kara (refer to
(p.196) for bottom Kara angle settings):
Kara owner's manual (EN) version 1.0
113
