Kyocera TASKalfa 265ci, Operation Manual

Page: 304 / 355

10-10
Troubleshooting > Solving Malfunctions
Printouts have black lines. Is the slit glass dirty? Clean the slit glass. 10-6
— Run [Laser Scanner Cleaning]. 9-25
Images are skewed. Are the originals placed correctly? When placing originals on the platen,
align them with the original size
indicator plates. 3-10
When placing originals in the
document processor, align the original
width guides securely before placing
the originals. 3-11
Is the paper loaded correctly? Check the position of the paper width
guides. 3-2
When displaying an image
sent from the machine on the
PC, an image size is shrunk
vertically or horizontally. Have you selected 200 × 100dpi
Normal or 200 × 400dpi Super for the
scan resolution? Select a scan resolution other than
200 × 100dpi Normal or 200 × 400dpi
Super when sending an image. 3-44
Offset occurs. — Run [Drum Refresh]. 9-25
— Increase the adjustment value for [MC]
setting. Increase the adjustment value
1 level at a time from the current value.
If there is no improvement after the
value is increased by 1 level, increase
by 1 level again. If there is still no
improvement, return the setting to the
original value. 9-26
Part of the image is
periodically faint or blurred. — Decrease the adjustment value for
[MC] setting. Decrease the adjustment
value 1 level at a time from the current
value. If there is no improvement after
the value is decreased by 1 level,
decrease by 1 level again. If there is
still no improvement, return the setting
to the original value. 9-26
Irregular horizontal lines
appear in the image. — Decrease the adjustment value for
[MC] setting. Decrease the adjustment
value 1 level at a time from the current
value. If there is no improvement after
the value is decreased by 1 level,
decrease by 1 level again. If there is
still no improvement, return the setting
to the original value. 9-26
The altitude is 1500 m or
higher and irregular
horizontal white lines appear
in the image. — Set Altitude Adjustment to [High 1]. If
there is still no improvement, change
the value to [High 2]. 9-26
Symptom Checkpoints Corrective Actions Reference
Page