Kyocera 1102RX3NL0, Operation Manual

Page: 66 / 242

2-35
Installing and Setting up the Machine > Installing Software
2
Display the screen.
3
Select [Custom Install].
4
Install the software.
1
Select the device to be installed.
IMPORTANT
If Wi-Fi or Wi-Fi Direct is enabled, be sure to specify the IP address for the port
name. Installation may fail if the host name is specified.
NOTE
• The machine cannot be detected unless it is on. If the computer fails to detect the
machine, verify that it is connected to the computer via a network or USB cable and
that it is turned on and click
(Reload).
• If the desired device does not appear, select [ Add custom device ] to directly select
the device.
1 Click [ View License Agreement ]
and read the License Agreement.
2 Click [ Accept ].
1
2
1
2