Kyocera 1102RX3NL0, Operation Manual

Page: 52 / 242

2-21
Installing and Setting up the Machine > Network Setup
3
[ Easy setup ] > [ Next ]
The machine is detected.
4
Select the machine > [ Next ]
5
Select [ Use the device settings. ] on [ Authentication mode ], and enter the login user
name and password. Login user name and Password are both Admin.
6
Configure the communication settings > [ Next ]
7
Change the settings of access point as necessary > [ Next ]
The network is configured.
Wireless LAN Connection by Using Wi-Fi Direct
1
Display the screen.
1
[ Menu ] key > [ ▲ ] [ ▼ ] key > [ Wi-Fi Direct Set ] > [ ► ] key
2
Enter the administrator ID and select the [ OK ] key.
3
Enter the administrator password and select the [ OK ] key.
4
[ ▲ ] [  ] key > [ Wi-Fi Direct ] > [ OK ] key
NOTE
• Only one machine can be searched using Wi-Fi Setup Tool. It may take times to search
the machine.
• If the machine is not detected, select [ Advanced setup ] > [ Next ]. Select [ Express ] or
[ Custom ] as device discovery method and specify the IP address or host name to
search the machine.
NOTE
Enter an ID consisting of between 1 and 16 numbers.
Select the [
▲ ] or [ ▼ ] key to enter a number.
Select the [ ◄ ] or [ ► ] key to move the cursor left or right.
The factory default settings for the administrator ID is 4000.
NOTE
Enter a password consisting of between 0 (no settings) and 16 numbers.
Select the [
▲ ] or [ ▼ ] key to enter a number.
Select the [ ◄ ] or [ ► ] key to move the cursor left or right.
The factory default settings for the administrator password is 4000.