Kyocera 1102RX3NL0, Operation Manual

Page: 166 / 242

7-19
User Authentication and Accounting (User Login, Job Accounting) > Using Job Accounting
Using Job Accounting
This section explains procedures while setting job accounting.
Login/Logout
If job accounting is enabled, an account ID entry screen appears each time you use this machine.
Login
When the screen for entry of account codes on the machine appears, perform the following.
1
Enter the account ID > [OK] key
2
Proceed to complete the rest of the steps.
Logout
When the operations are complete, select the [ Logout ] key to return to the account ID entry screen.
NOTE
You can set a number from 1 to 8 digits.
Select the [
▲ ] or [ ▼ ] key to enter a number.
Select the [ ◄ ] or [ ► ] key to move the cursor left or right.
If the entered account ID does not match the registered ID, a warning beep will sound and
login will fail. Enter the correct account ID.