46
Hitching the machine
Moving the drawbar
> Secure the drawbar by placing it in a well suited hoist
> Loosen the bolts and the nuts
> Move the drawbar to the desired position
> Tighten the bolts and the nuts
> Torque the bolts and the nuts to 450 Nm
> Remove the hoist
The hole pattern on the machine allows one extra position 5 cm high-
er. The drawbar must always be fitted with 3 bolts and nuts per side.
Moving the hitch eye
The hitch eye can be moved into six positions.
> Loosen the bolts and the nuts
> Move the hitch eye to the desired position
> Tighten the bolts and the nuts
→
Tightening torques, page 189
97
33
100.5
84.5
81
56
52.5
49
36.5
40
88
104
Hitch height (cm)
33
36.5
40
49
52.5
56
81
84.5
88
97
100.5
104
W
A0471
5 cm
Nuts
Bolts
Drawbar
Bolts
Nuts
Hitch eye
Summary of Contents for Vicon RV 2160
