Maintenance
227
Sensors
There are different types of sensors used in this machine:
•
Rotational sensor (like bale diameter sensor)
•
Proximity sensors (like tailgate lock sensor)
Rotational sensors
Bale growth sensor
The bale growth sensor must send correct information to the electron-
ic system. If it does not, calibration is required.
After producing a bale of the required diameter, the bale diameter in-
dicated on the display must match the actually produced bale diame-
ter.
Bale shape indication
sensor
The bale shape indication sensor must send correct information to the
electronic system.
If arrows appear in case the bale chamber is empty, calibration is re-
quired.
Make sure there is no pollution underneath the left/right sensor indica-
tor.
Bale growth sensor
Bale shape indication
sensor
Summary of Contents for Vicon RV 2160
