216
Maintenance
Belts and belt
alignment
The belts are driven by a rubber roller in the front section of the ma-
chine.
This roller is shaped slightly convex in every belt track thus assisting
the belt alignment.
Adjustment of the
guide roller
It is important the belts run aligned and do not wear through rubbing
along the belt guides. An adjustable guide roller in the rear section of
the machine enables correction of the belt alignment.
> Slacken the bolt one turn
> Adjust the roller into the desired direction using the nuts
> Tighten the bolt
RL machine only:
A second guide roller can be adjusted as well, this in order to get op-
timum belt alignment.
If the belt alignment can not be corrected sufficiently when adjusting
at one side, the guide roller can be adjusted at the other side as well.
> Loosen the bolt
> Adjust the roller
> Tighten the bolt
A
0463
Bolt
Nuts
Bolt
Summary of Contents for Vicon RV 2160
