196
Maintenance
General adjustment
The general setting is done by inserting the pin in a hole of the pattern.
> Move up the plate
> Remove the pin
> Move and place the pin
•
to 1: switch on the oil pump
•
to 2: switch off the oil pump
> Move down the plate fully
Lubrication tube adjust-
ment
The specific setting is done per lubrication tube, at the pump.
> Use a screwdriver to turn the individual screw at the oil pump to ad-
just the volume of oil per lubrication tube
•
turning clockwards: increase the volume
•
turning counterclockwards: decrease the volume
Oil pump
Plate
Oil
Pin
No oil
-
+
Oil pump
Screws
Summary of Contents for Vicon RV 2160
