![Kverneland Vicon RV 2160 Operation Manual Download Page 91](http://html.mh-extra.com/html/kverneland/vicon-rv-2160/vicon-rv-2160_operation-manual_2012971091.webp)
Use at the field
91
Adjustments bale
pressure
No modifications causing a higher pressure allowed
Any modification to obtain a higher pressure may cause damage to
the machine. Even at the attempt of such a modification all liability and
warranty become extinct.
The bale pressure can be set between 60 and 200 bar. The set bale
pressure can be controlled by closing the tailgate via the control valve
of the tractor. When the tailgate has been closed completely the set
pressure can be read on the pressure gauge.
The pressure can be adjusted by knob.
> Turn knob clockwards: pressure increases
> Turn knob counterclockwards: pressure decreases
When working with a tractor that cannot provide the set pressure you
only can verify the pressure setting when making the next bale.
The given pressure values are standard values only. The real values
required depends on the crop type and baling conditions. Therefore
they may differ a lot.
T
IP
The set pressure may not be reached if the crop quantity taken in is
too little.
Knob
Setting
Pressure (bar)
Very dry hay or dry straw 200
Normal dry hay
180
Silage
140 - 180 (dependent on crop humidity)
Summary of Contents for Vicon RV 2160
