66
Preparation for use
Changing to 12 or 11
knives
Focus
> Push to I
> Push to enter the working display
> Push to select knife control
Tellus
> Push to I
> Push to enter the working display
> Push to select knife control
> Open valves at the hydraulic block on the left side
> Move the hydraulic valve to depressurize the cutting system
> Close one of both valves at the hydraulic block on the left side
> Move the hydraulic valve to pressurize the cutting system
Half of the knives will retract or extract.
GP0425
Closed
Open
Summary of Contents for Vicon RV 2160
