Safety instructions
17
Working with the
machine
First use only after instruction
The machine may at the first time of use only be brought into use by
employees of the dealer, factory representatives or employees of the
manufacturer. False use after bringing the machine into use without in-
structions can cause damages to the machine or accidents.
Take care of technical correct condition
Only bring the machine into use in a technical correct condition. Check
all important parts and replace defective parts before use. Defective
parts can cause material or personal damages.
Do not remove protective covers
The protective covers should not be removed or evaded. Check all
protective covers before using. Unprotected machine parts can cause
heavy or deadly accidents.
Prohibition of transporting people on the machine
Nobody and nothing shall be transported on the machine during trans-
port. Transporting of people or objects on the machine is perilous and
prohibited.
Check the direct surroundings
Before driving and bringing into use of the machine the direct sur-
roundings must be checked. Take care of sufficient view. Only start
driving when no persons or objects are in the direct surroundings. Per-
ilous injuries can occur.
Tighten bolts and nuts
Check bolts and nuts regularly for being tight and tighten if necessary.
Because of using the machine bolts can get loose. Damages to the
machine or accidents can be caused.
Behaviour at troubles
At functional troubles stop and secure the machine immediately. Rem-
edy the trouble immediately or commission a workshop. Continuing
working with the machine cause accidents or damages.
Pto rotates after disengaging
After disengaging or switching off the pto, the machine will continue
running because of inertia. Keep a safe distance to the machine until
the pick-up and the moving parts really stand still.
Cornering or manoeuvring
When cornering, anticipate centrifugal forces caused by the distance
of the centre of gravity of the machine behind the tractor. Beware of
the turning radius and the inertia of the machine.
Bale ejection
Keep clear of the bale ejection area. Danger of crushing. Which can
cause severe injuries.
Never stay behind the machine when a bale is coming out.
Summary of Contents for Vicon RV 2160
