Kverneland Vicon RV 2160, Operation Manual

Page: 100 / 263

100
Use at the field
After the first bale
After the first bale, the following must be checked and readjusted if re-
quired:
•
Bale diameter
•
Bale density
•
Wrapping of the bale
Focus
•
Bale diameter
→
Basic display, page 112
•
Bale density
→
Bale diameter and mixed chamber settings, page 117
•
Wrapping of the bale
→
Twine tie settings, page 118
→
Net wrap settings, page 119
→
Net brake tension, page 206
Tellus
•
Bale diameter
→
Basic display, page 148
•
Bale density
→
Bale diameter and mixed chamber settings, page 155
•
Wrapping of the bale
→
Twine tie settings, page 156
→
Net wrap settings, page 157
→
Net brake tension, page 206
Rebaling bales
When rebaling bales, make sure:
•
the bales are clear of all net
•
the material has been spread to avoid an overload of the pick-up
or cutting system
End of baling
At the end of the job:
•
the last bale must have been wrapped
•
the last bale must have been cleared out
•
the tailgate must have been closed and locked
•
the pto must be switched off
•
the control box must be switched off
•
the pick-up must be moved fully up and locked
•
the valve in the hydraulic line must be closed
•
all doors and accesses must be closed and locked