Road transport
83
Preparation for
road transport
Before the machine is travelling by road, the machine must be placed
into transport position. Therefore
•
the pick-up must be lifted to maximum height
•
the bale chamber must be empty
Pick-up
When the machine is travelling by road, the pick-up must be fully lifted
to the maximum height.
> Lift the pick-up to maximum height
> Close the isolating valve on the hydraulic hose at tractor side
Bale chamber
The bale chamber must be empty before road transport may take
place. Eventual the last bale must be tied with either twine or net.
Twine tie
Focus
> Push to tie the last bale, if necessary
Tellus
> Push to tie the last bale, if necessary
Net wrap
Focus
> Push to tie the last bale, if necessary
Tellus
> Push to tie the last bale, if necessary
> Open the tailgate to eject the bale
> Close the tailgate
Summary of Contents for Vicon RV 2160
