Road transport
81
Road transport
Safety
Before road transport will take place, please read the following safety
information. The compliance is prescribed and helps you to avoid ac-
cidents.
Close valves
Before road transport close all valves. With open valves and false op-
eration the lifting cylinder can be lowered. Traffic accidents can be
caused.
Clean the machine before road transport
Clean the machine, before every road transport, from crop residues
and heavy dirt. Crop or dirt, falling at the road, can cause a slippery
state of the road. This can lead to fatal accidents.
Tractor rear wheels may not touch the drawbar
During driving through curves the tractor rear wheels may not touch
the drawbar. The tractor rear wheels can touch the pto drive shaft. Se-
rious machine damages can be caused.
Do not transport bales in the bale chamber
Never transport bales in the bale chamber. Transporting a bale influ-
ences the tractor’s steering and braking capacities. Personal or ma-
chine damages can occur.
Before road trans-
port
Road transport must be done in transport position. To bring the ma-
chine into transport position, the following steps are necessary:
> Remove crop residues and heavy dirt
> Lift the pick-up fully
> Close the tailgate
Summary of Contents for Vicon RV 2160
