Troubleshooting
257
Pick-up
Problem
Cause
Solution
Page
Windrow is not picked up
Pick-up is up or is set too high
> Lower the pick-up or
> set the pick-up wheels or
chains
Overload safety activated
> Remove the blockage
•
Drive chain is broken
•
The sprocket is jumped off
> Check the chain, replace as
required
Too high a driving speed
> Adapt the driving speed
Windrow too small / thin
> Make bigger windrows
79
Pick-up tines bent or broken
> Straighten the tines or
> replace the tines
Irregular crop feed
Too high a pressure of wind
guard
> Reduce the pressure of the
wind guard
Wind guard bounces
Wind guard rides on windrow
> Adjust the wind guard to a
higher position
The pick-up is blocked
> Switch off the pto
> Shut down the tractor engine
and remove the ignition key
> Wait until the machine has
come to a real stand still
> Remove the crop
Do not attempt to push or pull
the material into or out of the
machine while it is operating!
Regularly remove accumulated
materials to reduce fire hazard
and interference with the oper-
ating parts!
Summary of Contents for Vicon RV 2160
