Maintenance
203
Tension arm
The tension arm:
•
builds up the starting chamber
•
determines the belt tension
The set-up ensures the most effective build up of the bale pressure
with help of the hydraulic tension cylinder and a spring.
Alignment of the tension
arm
The tension arm can be aligned by adjusting the tension arm hinge at
the right side of the machine.
The tension arm has to be adjusted to ensure the distance between
tension arm and machine wall is identical at either side.
> Open tailgate hydraulically
> Close safety valve in front of the machine
> Slacken nuts of both carriage bolts
> Slacken upper nuts
> Slacken lower nut
> Align tension arm (use shims as required)
> Retighten nuts of both carriage bolts
> Retighten lower nuts
> Retighten upper nuts
> Open safety valve in front of the machine
> Close tailgate hydraulically
Hinge nuts tension arm
The tension arm hinge nuts must be checked and tightened as re-
quired after 100 bales after aligning the tension arm.
W
A0233
Tension arm
W
A
0466
Lower
nut
Hinge
Nut carriage
bolt
Upper
nuts
Nut carriage
bolt
Summary of Contents for Vicon RV 2160
