116
Focus
Manual or auto-
matic mode
The system starts in automatic mode. Automatic mode is standard
setting. Manual mode can be used:
•
to complete a field
•
during twine or net installation
•
to create a user-defined twine pattern
The complete baling cycle is automatic except the wrapping.
> Push to choose manual mode
or
> Push to choose automatic mode
Automatic mode is standard setting.
Manual net binding
> Push to choose net wrap
Depending on the setting, the button shows net or twine tie.
> Push to start wrapping
If necessary
> push to extend the actuator
or
> push to intend the actuator
Clearing used net indica-
tion
> Push to clear the used net metres indication
Manual twine binding
> Push to choose the desired twine tie program
> Push to choose twine tie
Depending on the setting, the button shows net or twine tie.
> Push to start wrapping
If necessary
> push to extend the twine tubes
or
> push to intend the twine tubes
Summary of Contents for Vicon RV 2160
