78
Preparation for use
Core density ad-
justment
After some time, the belts are getting longer. In standard case the ten-
sion arm is little hydraulically loaded when the bale chamber is empty.
This is in order to create a uniform core diameter. To compensate the
belt elongation a bracket on the tension arm can be set.
> Loosen bolt
> Place bracket to the desired core density
> Tighten bolt
T
IP
After mounting the bracket and tightening of the bolt, there should al-
ways remain a gap between bracket and support when the bale cham-
ber is empty.
Bracket
Tension arm
Bolt
W
A0480
Large core
diameter
Middle core
diameter
Small core
diameter
Support
Summary of Contents for Vicon RV 2160
