Preparation for use
65
Cutting length - OC
23 HP
The cutting length can be chosen as desired, by varying the amount
and the position of the knives.
When using 11 or less knives at once, quick-change of knives is pos-
sible by changing between 2 main bars with each 11, 12 or less knives.
Selecting the knives will only be possible if:
•
the knives are selected
•
the concerning hydraulic valve is operated
Changing to 23 knives
Make sure all 23 knives are present.
Focus
> Push to I
> Push to enter the working display
> Push to select knife control
Tellus
> Push to I
> Push to enter the working display
> Push to select knife control
> Open the valves at the hydraulic block on the left side
> Move the hydraulic valve to pressurize the cutting system
The knives will retract.
GP0425
Closed
Open
Summary of Contents for Vicon RV 2160
