156
Tellus
Twine tie settings
> Push, the display twine tie settings appears
Adjustable are:
•
Distance from lateral wraps to the side of the bale in cm
•
Number of wraps near the bale sides (starting wraps)
•
Number of intermediate wraps
•
Number of final wraps
The standard twine tie programmes can be changed upon desire.
Programme 6 is for flax.
The number of wraps does not depend upon the bale diameter. At the
start of wrapping the control system automatically calculates the quan-
tity taking into account the actual bale diameter. Only the pto speed
influences the real number of wraps: it is based upon a pto speed of
540 rpm.
> Push to select a value to be changed
> Push to set the desired value
> Push to confirm
> Push to activate the concerning tab
The number is shown in the working display.
> Push to reset the all values to zero
Twine tie programs
OK
Summary of Contents for Vicon RV 2160
