Kubota M7131, Operator'S Manual

Page: 241 / 298

209 PERIODIC SERVICE
B
Checking DPF/SCR Muffler
To avoid personal injury or death:
A
Before checking or cleaning the DPF/SCR
muffler, stop the engine and wait until it cools
down enough.
Check the DPF/SCR muffler and its surroundings for
accumulation of anything flammable. Otherwise a fire may
result.
B Checking Brake Pedal
To avoid personal injury or death:
A
Be sure brake pedals have equal adjustment
when using locked together. Incorrect or
unequal brake pedal adjustment can cause the
tractor to swerve or roll-over.
1. Inspect the brake pedals for free travel, and smooth
operation.
2. Adjust if incorrect measurement is found:
(See "Adjusting Brake Pedal" in "EVERY 100 HOURS"
in "PERIODIC SERVICE" section.)
B
Checking Parking Brake
Pull the parking brake lever to apply the brakes. With the
key switch at "ON" position, the parking brake warning
indicator on the instrument panel lights up.
To release the brakes, push in the button at the tip of the
parking brake lever and tilt down the lever.
A Make sure the lamp on the instrument panel goes
off when parking brake lever is down.
B
Checking Gauges, Meter and Easy
Checker(TM)
1. Inspect the instrument panel for broken gauge(s),
meter(s) and Easy Checker (TM).
2. Replace if broken.
B Checking Head Light, Turn Signal / Hazard
Light etc.
1. Inspect the lights for broken bulbs and lenses.
2. Replace if broken.
B
Checking Seat Belt
1. Always check condition of seat belt attaching
hardware before operating tractor.
2. Replace if damaged.
B Checking Movable Parts
If any of the movable parts, such as levers and pedals, is
not smoothly moved because of rust or sticky material, do
not attempt to force it into motion.
In the above case, remove the rust or the sticky material,
and apply oil or grease on the relevant spot.
Otherwise, the machine may get damaged.
(1) DPF muffler
(2) SCR muffler
(1) Parking brake lever
(2) Release button (A) "PULL"
(B) "RELEASE"