Kubota M7131, Operator'S Manual

Page: 226 / 298

CAB OPERATION 194
A
Please refer to Front Loader Operator’s manual for
detail of electric wiring connection.
B
ISOBUS Monitor Socket
An implement monitor meeting ISO Standard 11783 may
be connected to the socket.
B
Signal Socket according to ISO Standard
11786
When connecting the connectors of implements meeting
ISO Standard 11786 to this socket, the following signals
will be transmitted from the tractor to the implement.
Based on the transmitted signals, the tractor can control
implement operations including stopping, operation
restart, adjustment of dispersal amount (fertilizer, for
example) etc.
A
Implement side default settings are required to adjust
the dispersal amount and so on.
C Signals from the Signal Socket
(1) Loader electrical outlet
(1) ISOBUS monitor socket
Output Signals Remarks
1 Actual traveling speed
Operation with GPS
mounted
2 Travel speed
Speed calculated from
engine rpm etc.
3
Rear 3-point hitch
position Lift arm height displayed
by voltage
4 Operating or halted
When raising lift arm:
Operation halted
When lowering lift arm:
Operating
5 Rear PTO rpm
6 Power supply (5 A)
7 Ground
(1) Signal socket