87
OPERATING THE ENGINE
B
Parking Brake
1. After stopping the machine, be sure to apply the
parking brake.
2. If you leave the operator’s seat with the PTO shaft
turning, the buzzer starts sounding.
3. Once the parking brake has been applied, the
machine sets itself in the 4-wheel drive mode. (This
helps the 4 wheels to increase their gripping force on
slopes.)
A
When the key switch is turned off with no parking
brake applied, the warning buzzer sounds for around
10 seconds.
B
Key Switch
The starter switch has 4 positions.
B
Engine Power Boost
If any of the following conditions, the engine output is
boosted for higher working efficiency. For work requiring
no high output, on the other hand, the machine runs at
standard output level with fuel economy in mind.
C
Traction operation
When the traveling speed rises above 20 km/h (12.4
mph), the engine output boosts itself. When it drops below
18 km/h (11.2 mph), the power boost turns itself off.
C
PTO operation
When the PTO clutch is engaged, the engine output
boosts itself.
"OFF" (Engine-Stop)
"ACC" (Electrical
Power-accessories)
"ON" (Engine-Run)
"START" (Engine-Start)
NOTE:
ACC...
A
All the accessories can be used while the
engine is stopped.
A
Do not leave the key at "ACC" position. The
battery will be quickly discharged. Turn it
back to "OFF" after use.
Summary of Contents for M7131
