Kubota M7131, Operator'S Manual

Page: 105 / 298

73 PRE-OPERATION CHECK
PRE-OPERATION CHECK
DAILY CHECK
To prevent trouble from occurring, it is important to know
the condition of the tractor well. Check it before starting.
To avoid personal injury or death:
A
Be sure to check and service the tractor on a
level surface with the engine shut off and the
parking brake "ON" and implement lowered to
the ground.
Check item
- Walk around inspection
- Check engine oil level
- Check transmission oil level
- Check coolant level
- Check water separator
- Clean grill, radiator and cooler
- Check DPF/SCR muffler
- Check brake pedal
- Check parking brake lever
- Check pneumatic brake pressure (if equipped)
- Check indicators, gauges and meter
- Check lights
- Check seat belt
- Check movable parts
- Supply DEF/AdBlue®
- Refuel
(See "DAILY CHECK" in "PERIODIC SERVICE"
section.)
- Care of danger, warning and caution labels
(See "DANGER, WARNING AND CAUTION LABELS"
in "SAFE OPERATION" section.)
SERVICE INSPECT INDICATOR
By monitoring the LCD unit on the instrument panel, 10
maintenance items (discussed later) communicating with
the tractor’s hour meter can be kept under accurate
control.
When Engine Oil, the most significant of all these, reaches
its replacement time, the Service Inspect Indicator will
automatically appear on the LCD.
After replacing the oil, the indicator will disappear when
you perform reset, but will appear when again reaching
the relevant time.
Confirm the other maintenance items with the procedure
below before operation as well. For this reason, act
quickly when replacement and maintenance times are
reached.
B
Checking the Items Reaching the
Maintenance Interval
1. Press the "SET UP/00" switch on the instrument panel,
and the setting mode screen appears.
2. With the "Select" switch, choose "SERVICE INSPECT
INDICATOR". Then press the "ENT" switch.
(1) Service inspect indicator (Wrench mark)