31
INTELLIPANEL(TM) CONTROL
Selected
screen
Display
Remarks
Reference
page
4/6
Average work
distance fuel
consumption
A
The "Average work distance fuel consumption" is
measured based on the fuel consumption from the
previous resetting.
A
With the "Average work distance fuel consumption"
displayed and selected, hold down [SET UP/00]
switch. The setting goes back to "0.0".
---
Instantaneous
work area
operating
efficiency
A
The "Average work area operating efficiency" is
measured based on the hourly coverage from the
previous resetting.
A
With the "Average work area operating efficiency"
displayed and selected, hold down [SET UP/00]
switch. The setting goes back to "0.0".
A
Preset the implement width. If not preset correctly,
incorrect data will be displayed. (Refer to the "Initial
setting" in "LIQUID CRYSTAL DISPLAY" in
"INTELLIPANEL(TM) CONTROL" section.)
Average work
area operating
efficiency
Work area
A
Displays the work area measured from the previous
resetting.
A
With the "Work area" displayed and selected, hold
down [SET UP/00] switch. The setting goes back to
"0.0".
A
Preset the implement width. If not preset correctly,
incorrect data will be displayed. (Refer to the "Initial
setting" in "LIQUID CRYSTAL DISPLAY" in
"INTELLIPANEL(TM) CONTROL" section.)
Travel distance
A
Displays the travel distance measured from the
previous resetting.
A
With the "Travel distance" displayed and selected,
hold down [SET UP/00] switch. The setting goes
back to "0.0"
---
DPF
temperature
A
Displays the DPF muffler temperature.
5/6
PM buildup
A
Displays the PM buildup inside the DPF muffler.
A
Regeneration is needed when the 100% level has
been reached.
A
A bar extending farther to the right shows increased
PM.
PM buildup
graph
Slip rate
A
The "Average slip rate" is measured based on the
slip rate from the previous resetting.
A
With the "Average slip rate" displayed and selected,
hold down [SET UP/00] switch. The setting goes
back to "0.0".
---
Average slip
rate
---
Cruise control
forward speed
setting
A
Only Premium KVT model
Cruise control
reverse speed
setting
Summary of Contents for M7131
