3-POINT HITCH & DRAWBAR
148
To avoid personal injury or death:
A
Be sure to stop the engine.
A
Do not stand between tractor and implement
unless parking brake is applied.
A
Before attaching or detaching implement,
locate the tractor and implement on a firm level
surface.
A
Whenever an implement or other attachment is
connected to the tractor 3-point hitch, check
full range of operation for interference, binding
or PTO separation.
A
Do not exceed maximum allowable length of
either lifting rod, or the lifting rod will come
apart and the 3-point equipment may fall.
B
Remote Hitch UP / DOWN Switch
To avoid personal injury or death:
A
Do not use the Remote hitch up / down switch
when the implement is attached on the 3-point
hitch.
These switches provided on both of the rear fenders are
used to raise and lower the 3-point hitch for aligning the
arm with the implement only. Press the "UP" switch and 3-
point hitch goes up. Press the "DOWN" switch and the 3-
point hitch comes down.
Movement of the 3-point hitch stops when the switch is
released.
A
If these switches are pushed, the 3-point hitch's
position lock is activated and 3-P. Lifting / Lowering
indicator starts flashing (2 or so flash every second). If
it flashing, press the 3-P. quick raise switch or 3-P.
quick lower switch to release the position lock. (The
indicator goes off or turns on.)
B
Lifting Rod
To avoid personal injury or death:
A
Do not extend lifting rod beyond the groove on
the thread rod.
1. To adjust the length of the lifting rod, lift the adjusting
handle and turn to desired length.
2. After adjusting, lower the lifting rod adjusting handle to
the lock position.
3. When extending the rod using adjusting handle, do not
exceed the groove on the rod thread.
2
.
Attaching and detaching implements
(1) "UP" switch
(2) "DOWN" switch
(1) Lifting rod
(2) Adjusting handle
(A) "GROOVE"
(1) Adjusting handle
(A) "LOCK POSITION"
(B) "UNLOCK POSITION"
Summary of Contents for M7131
