HYDRAULIC UNIT
164
B
3-P. Quick Raise/Lower Switch
To avoid personal injury or death:
A
Before road traveling, be sure to lock the
implement with the 3-point hitch lock button.
If traveling with the ride control on, unlock the
3-point hitch lock button.
A
Do not use the 3-P. quick raise/lower switch on
road traveling.
A
When an implement is changed, do not use the
3-P. quick raise/lower switch before checking
the full range of operation for interference
using the depth control dial (hydraulic dial).
These switches are used to raise and lower the
implement. This facilitates turning in the field.
Press the "RAISE" switch, the 3-P. Lifting/Lowering
indicator lights up and the implement goes up. Press the
"LOWER" switch, and the indicator goes off and the
implement comes down.
When the "RAISE" switch has been pressed to raise the
implement, the depth control dial (hydraulc dial) cannot
function.
1. 3-point hitch working range
Set the depth control dial (hydraulic dial) for a bottom
limit and the lift arm top limit adjustment dial or switch
for a top limit. The 3-P. quick raise/lower switches are
controls for the raising and lowering within the limits
set by the depth control dial (hydraulic dial) and the lift
arm top limit adjustment dial or switch.
2. One-touch floating function
Hold down the "LOWER" switch to keep the 3-point
hitch floating. This function is helpful in plowing, for
example. Release the switch and the 3-point hitch
returns to the draft control position.
3. "RAISE" and "LOWER" operation with the 3-point
hitch going halfway
(1) When the "RAISE" or "LOWER" switch is pressed
with the 3-point hitch going up halfway, the 3-point
hitch stops at this position. (The indicator starts
blinking.) Re-push the "RAISE" or "LOWER"
switch, and the 3-point hitch will go up or down
respectively.
(2) To lower the 3-point hitch with the 3-point hitch
going up halfway, hold down the "LOWER" switch
for 2 seconds or push it twice.
(3) When the "RAISE" switch is pressed with the 3-
point hitch going down halfway, the 3-point hitch
goes up.
3-P. Quick raise switch
3-P. Quick lower switch
(A) "PUSH"
(1) 3-P. Lifting / Lowering Indicator
Summary of Contents for M7131
