47
INTELLIPANEL(TM) CONTROL
C
Detailed settings of remote control valve
Each of the valves can be individually preset in detail, but only one can be set for priority flow.
1. Display the valve number (4) to be set in detail.
2. To ensure the priority flow for the valve 1, touch the left
half of the priority flow status on/off switch (7). A touch
on the right half clears this setting.
Once the priority flow is ensured, the indicator (2)
lights up and stays on.
3. To set the automatic shut-off timer, touch the left half
of the automatic shut-off timer on/off switch (8). A
touch on the right half clears this setting.
Once the timer is ensured, the indicator (3) lights up
and stays on.
4. To lock the remote control valve, touch the left half of
the remote control valve lock/unlock switch (6). A
touch on the right half clears this setting.
5. Touch the switch (5), and the previous screen
reappears.
C
Setting the oil flow rate and timer
1. To adjust the oil flow rate for the implement (remote
control cylinder), use the "Plus (+)" switch (9) and the
"Minus (-)" switch (10).
Raise the percentage to increase the oil flow rate.
2. The timer may be preset up to 60 seconds.
If the timer is set to infinity (
∞
), the remote control valve
will go into continuous operation.
A
When you have moved the remote control valve switch
or lever to the "raise" or "lower" position and then
released your hand from the switch or lever, the timer
gets activated. When the set time is over, the oil flow
to the implement is interrupted. After this stage, the
timer can be set only with the switch or lever.
A
If during an action the switch or lever is moved in the
reverse direction, the timer setting is cancelled.
(1) Remote control valve operating
status indicator
(2) Priority flow status indicator
(3) Automatic shut-off timer indicator
(4) Remote control valve number
(5) Previous screen resume switch
(6) Remote control valve lock/unlock
switch
(7) Priority flow status on/off switch
(8) Automatic shut-off timer on/off
switch
(9) Plus (+) switch
(10) Minus (-) switch
(11) Automatic shut-off timer control
(12) Discharge rate from cylinder
(retract) port control
(13) Discharge rate from cylinder
(extend) port control
Summary of Contents for M7131
