Kubota M7131, Operator'S Manual

Page: 181 / 298

149 3-POINT HITCH & DRAWBAR
B
Top Link
To avoid personal injury or death:
A
When extending the top link, do not exceed the
groove on the top link thread, or the top link will
come apart and the 3-point equipment may fall.
1. Adjust the angle of the implement to the desired
position by shortening or lengthening the top link.
2. Then return the lock handle to the "LOCK" position.
3. The proper length of the top link varies according to
the type of implement being used.
B
Automatic Stabilizer
The raised or lowered implement can be automatically
swung from side to side or locked.
C To swing the implement during the work and keep
the raised implement locked during the tractor
swivel:
1. Readjust the chain length in the following way: so that
the lock cover is "released" when the lower link is in its
working range, and "locked" when the tractor is
swiveled with the lower link is raised.
C
To keep the implement from swinging during the
work and tractor swivel alike:
1. Readjust the chain length so that the lock cover is
always "locked" even if the lower link is moved up and
down.
(1) Top link
(2) Lock handle (A) "LOCK" position
(B) "GROOVE"
(1) Automatic stabilizer
(2) Lock cover
(3) Chain
(A) "UN-LOCK"
(B) "LOCK"