Kubota M7131, Operator'S Manual

Page: 183 / 298

151 3-POINT HITCH & DRAWBAR
C
Adjusting Lower Link Width
Set the width (W1) of lower links to be the same as width
(W2) of the implement.
(See "Stabilizers" in this section to adjust the width (W1)
of lower links.)
C
Attaching implement to Tractor
1. Set the release lever on the quick hitches to "LOCK"
position, if its lever is in "UNLOCK" position.
(Self-locking latches are closed)
2. With the lower links fully lowered, reverse the tractor
until the quick hitches are beneath the implement ball-
joints.
3. Raise the lower links using the depth control dial until
the quick hitches engage the ball-joints.
A
An audible click will be heard as the self-locking
latches engage the implement ball-joint.
4. Lower the top link hook onto the upper implement ball-
joint and press down until the latch is engaged. If
necessary, adjust the top link length.
A The hook of a top link is attached in a downward
direction.
(1) Lower link
(2) Stabilizer
(3) Implement
(1) Top link
(2) Lower link
(3) Latch
(4) Release lever (A) "LOCK" position
(B) "UNLOCK" position