Kubota M7131, Operator'S Manual

Page: 182 / 298

3-POINT HITCH & DRAWBAR 150
C
Adjusting the lower link's width
The 3-point link of this tractor is of Category III. (The lower
link is 1010 mm (40 in.) wide as a standard.)
Do not turn the adjusting handle unless otherwise
necessary. The lower link's width may get out of spec.
The guideline is that the groove is visible. Finally, return
the handle to its storage position.
B
Quick Hitch (Hook type)
To avoid personal injury or death:
Confirm the below when installing the implement:
A
Make sure the hook of the quick hitch is
securely locked
The 3-point hitch with quick-hitch consists of a pair of
lower links and a top link, all of which have claw ends that
permit rapid attaching and detaching of implements.
C
Installing Ball-joint to Implement
Before the implement is installed on the 3-point hitch with
quick hitches, it is necessary to install the ball-joints to the
implement according to the following instructions.
(1) Lock cover
(2) Stabilizer rod
(3) Adjusting handle (A) "GROOVE"
(B) "STORAGE POSITION"
(1) Plain ball-joint (for upper hitch pin)
(2) Ball-joint (for lower hitch pin)