OPERATING THE TRACTOR
108
B
Shuttle Neutral Button
Press this button to return the transmission to the neutral
position.
A
Even when the shuttle lever is shifted to the forward or
reverse position, pressing the button puts the
transmission to the "neutral" position.
B
Creep Gear Shift Lever
(if equipped)
C
Operating the creep gear shift lever
1. Stop the tractor and step on the clutch pedal.
2. Pull up the creep gear shift lever, and the creep mode
turns on. Push it down to turn off the creep mode.
3. With the creep mode on, the range gear shift works in
4 stages; A, B, C and D. (The stages E and F are not
in effect.)
C
Creep speed should be used only when doing one
of the following jobs:
1. Deep rotary-tilling and harrowing
2. Planting
3. Turf application
C
Creep speed can not be used for any of the
followings:
1. Pulling a trailer
2. Front-loader operation
3. Front-blade operation
4. Earth-moving
5. Entering and leaving a field
6. Loading onto and unloading from a truck
To avoid personal injury or death:
A
When you leave the tractor, be sure to apply the
parking brake and stop the engine.
A
IN APPLYING THE BRAKES:
A
The torque of the wheel axle is extremely
high while creep speed is being used. Be
sure to step down on the clutch pedal
completely before applying the brakes, or
the torque will overcome the brakes.
(1) Shuttle neutral button
(1) Creep gear shift Lever
(A) ...Creep ON
(B) ...Creep OFF
Summary of Contents for M7131
