Kubota M7131, Operator'S Manual

Page: 101 / 298

69 INTELLIPANEL(TM) CONTROL
C
Setting the operating conditions and beginning
recording
The operating conditions for which you want to record
data can be set with the 6 switches at bottom right of the
screen, and once set can be confirmed with indicators (9)
through (14).
Simultaneous setting of multiple switches for operating
conditions is also possible, but when setting for two
conditions or more, data will be recorded when at least
one condition has been met.
After setting, touch the record start switch (1) to begin
recording, and the record stop switch (2) to end recording.
(1) Lift arm
Touch the switch to switch the indicator among "Lift arm
raise", "Lift arm lower" and "OFF".
When you select "Lift arm lower", data will be counted only
when the lift arm is lowered.
When you select "Lift arm raise", data will be counted only
when the lift arm is raised.
(2) External signal input
Touch the switch to switch between the "ON" (lit) and
"OFF" (unlit) indicators.
When you select external signal input ON, data will be
counted only during external signal input.
For details, consult your local KUBOTA Dealer.
(3) Remote control valve
Touch the switch to switch the indicator among "Remote
control valve" 1 through 6 and OFF (unlit), in that order.
When you select "Remote control valve 1", data will be
counted only when valve 1 is operating.
(4) Front PTO
Touch the switch to switch between the "ON" (lit) and
"OFF" (unlit) indicators.
When you select "Front PTO ON", data will be counted
only when the front PTO is rotating.
(5) Rear PTO
Touch the switch to switch between the "ON" (lit) and
"OFF" (unlit) indicators.
When you select "Rear PTO ON", data will be counted
only when the rear PTO is rotating.
(6) Progress
Touch the progress switch to switch between the "ON" (lit)
and "OFF" (unlit) indicators.
When you select "Progress", data will be counted only
when the tractor is in progress.
C
Record status indicators
Record status indicators use the following colors for
identification.
1. Amber indicator lit: Data is being recorded (counted)
2. Green indicator lit: Data recording interrupted
3. Indicators off: Data recording stopped
(1) Record start switch
(2) Record stop switch
(3) Lift arm switch
(4) External signal
input switch
(5) Remote control valve
switch
(6) Front PTO switch
(7) Rear PTO switch (8) Progress switch
(9) Lift arm indicator
(10) External signal input indicator
(11) Remote control valve indicator
(12) Front PTO indicator
(13) Rear PTO indicator
(14) Front wheel drive (4WD)
indicator
(1) Counting status indicator
(2) Lift arm indicator
(3) External signal input indicator
(4) Remote control valve indicator
(5) Front PTO indicator
(6) Rear PTO indicator
(7) Progress indicator