Kubota M7131, Operator'S Manual

Page: 62 / 298

30 INTELLIPANEL(TM) CONTROL
1/6
Memory A rpm 88
Memory B rpm 88
Upper-limit rpm
setting
88
2/6
Instantaneous
loading factor
A The "Average loading factor" is measured based on
the loading factor from the previous resetting.
A
With the "Average loading factor" displayed and
selected, hold down [SET UP/00] switch. The
setting goes back to "0".
A
The "Instantaneous loading factor graph" displays
the instantaneous loading factor in real time. (A bar
extending farther to the right shows a higher load.)
---
Average
loading factor
---
Instantaneous
loading factor
graph
---
Rear PTO rpm
50
140
Front PTO rpm if equipped
50
144
Instantaneous
fuel
consumption A The "Instantaneous fuel consumption" is measured
per hour.
A
The "Average fuel consumption" is measured per
hour from the previous resetting.
A With the "Average fuel consumption" displayed and
selected, hold down [SET UP/00] switch. The
setting goes back to "0.0".
---
3/6
Average fuel
consumption
---
Mileage graph ---
Total fuel
consumption
A
Displays the total fuel consumption measured from
the previous resetting.
A The maximum value which can be displayed is 999
gallons or 999 liters.
A
With the "Total fuel consumption" displayed and
selected, hold down [SET UP/00] switch. The
setting goes back to "0.0".
---
Instantaneous
work area fuel
consumption
A
The "Average work area fuel consumption" is
measured based on the fuel consumption from the
previous resetting.
A With the "Average work area fuel consumption"
displayed and selected, hold down [SET UP/00]
switch. The setting goes back to "0.0".
A Preset the implement width. If not preset correctly,
incorrect data will be displayed. (Refer to the "Initial
setting" in "LIQUID CRYSTAL DISPLAY" in
"INTELLIPANEL(TM) CONTROL" section.)
24
Average work
area fuel
consumption
24
Instantaneous
work distance
fuel
consumption A The "Instantaneous work distance fuel
consumption" is the work distance per fuel
consumed.
---
Selected
screen
Display Remarks
Reference
page