Kubota M7131, Operator'S Manual

Page: 164 / 298

OPERATING THE TRACTOR 132
B
Coolant Temperature Gauge
To avoid personal injury or death:
A
Do not remove radiator cap until coolant
temperature is well below its boiling point.
Then loosen cap slightly to the stop to relieve
any pressure before removing cap completely.
1. With the key switch at "ON", this gauge indicates the
temperature of the coolant. "C" for "cold" and "H" for
"hot."
2. If the indicator reaches the red zone position, engine
coolant is overheated. Check the tractor by referring to
"TROUBLESHOOTING" section.
B Tachometer
The tachometer indicates the engine speed on the dial.
HEADLAND MANAGEMENT SYSTEM
To avoid personal injury or death:
A
Never utilize the Headland Management
System, if anyone is in the work area of the
tractor.
B
What is Headland Management System?
Depending on different types of crops and working
methods, your headland may require different operation.
Once such procedures are preprogrammed, the operator
can run the machine on headland in a simple way for
better productivity and less operator fatigue.
For instance, let’s preprogram the operating procedure on
headland as shown in the table below.
1. Press the field-out button when you reach the
headland, and the steps (1) thru (4) are carried on in
sequence.
2. After turning the machine, press the field-in button,
and the steps (5) thru (8) are carried on in sequence.
(1) Coolant temperature gauge (A) "RED ZONE"
(1) Engine revolution
Operating example on headland
Field out Field in
(1) Implement [UP]
(2) PTO [OFF]
(3) Differential lock [OFF]
(4) 4WD [OFF] (5) 4WD [ON]
(6) Differential lock [ON]
(7) PTO [ON]
(8) Implement [DOWN]
(1) Field out button
(2) Field in button