Konica Minolta bizhub PRESS 1052, User Manual

Page: 331 / 540

bizhub PRESS 1250/1052 8-6
8.1 Making Output Setting 8
[Stacker Auto] key
If the machine has multiple units of Large Capacity Stacker LS-505 installed, the [Stacker Auto] key appears
on the Output Setting Screen. Pressing [Stacker Auto] will lead to the delivery managed as follows (up to three
Large Capacity Stacker LS-505 options can be connected. Those connect stackers are hereafter referred
to as "stacker 1", "stacker 2" and "stacker 3" from the right to the left.)
-
When stacker 1 reaches the limit, the next job will be delivered to stacker 2. If three stackers are con-
nected and stackers 1 and 2 reach the limit, the next job will be delivered to stacker 3.
-
If stacker 1 becomes unavailable due to some trouble, stacker 2 will take over. If three stackers are con-
nected and stackers 1 and 2 become unavailable due to some trouble, stacker 3 will take over.
-
If the paper removal button provided on the top surface of stacker 1 is pressed while stacker 1 is op-
erating for the current delivery, the next job will be delivered to the stacker 2. If three stackers are con-
nected and the paper removal button provided on the top surface of stacker 2 is pressed while stacker
2 is operating for the current delivery, the next job will be delivered to the stacker 3.
[Stacker Auto] functions as described above provided that all the stackers operate as expected, and that ei-
ther the next stacker to receive delivery has no remaining paper or [Pile Allow] has been selected.