Konica Minolta bizhub PRESS 1052, User Manual

Page: 376 / 540

bizhub PRESS 1250/1052 8-51
8.8 Using Perfect Binder PB-503 8
%
If the paper weight specified for the selected tray is inadequate for body set, the binding operation
cannot be performed. Select either [17-20 lb Bond] or [20-24 lb Bond].
%
The binding operation may not be performed even if one of the paper weight mentioned above is
specified. The number of body set pages may also be limited depending on the selected paper
weight. For details, see Section 7 of the POD Administrator's Reference.
8
Press [Output Setting] and [Perfect Bind] in sequence.
The Perfect Bind Screen will be displayed.
The heater of the perfect binder automatically starts warming up. The warmup takes approximately 20
minutes.
NOTICE
Perfect Binder PB-503 will not stop warming up even if [Default Set] is pressed on the Output Setting
Screen or Reset is pressed on the control panel .
To stop using Perfect Binder PB-503 , return to the Machine Screen, then press [OFF] of PB heater
switch. When you stop using the perfect binder, be sure to turn off the heater so as to prevent the deg-
radation of glue pellets.
9
Select the tray loaded with covers.
%
To the right of [Cover Tray], press [Change Set] to select the tray to which the cover paper has been
loaded in step 4.