Konica Minolta bizhub PRESS 1052, User Manual

Page: 169 / 540

bizhub PRESS 1250/1052 5-45
5.12 Disposing Punch Waste 5
5.12 Disposing Punch Waste
The following options have a puncher installed.
-
Finisher FS-532 ( Punch Kit PK-522 to be optionally installed in Finisher FS-532 )
-
Folding Unit FD-503
-
Multi Puncher GP-501
-
Auto Ring Binder GP-502
This section describes indications on the screen to inform you that the disposal of punch waste is due, and
also instructions on how to dispose it.
5.12.1 Emptying Scrap Box of Finisher FS-532
If Finisher FS-532 is mounted with Punch Kit PK-522 , the following message will appear in the message
area of the screen when the scrap box of Punch Kit PK-522 becomes full.
[Punch-hole scrap box is full / Please empty scrap box]
Also, the message [Punch-Hole Scrap Box Full] appears and its indicator lights in red in the Supply/Scrap
Parts area of the Machine Screen.
Follow the procedure below to empty the scrap box.
1
Display the help message on the Machine Screen, then press [Consumable/Scrap].
2
Press the [Scrap (PK)] tab at the top of the help message area.
3
Perform the process while pressing [
+
] or [
,
] to follow the steps.