Konica Minolta bizhub PRESS 1052, User Manual

Page: 370 / 540

bizhub PRESS 1250/1052 8-45
8.8 Using Perfect Binder PB-503 8
Original: single-sided, odd number
Body set: duplex copying
Cover print: ON, simplex
Original: single-sided, odd number
Body set: duplex copying
Cover print: ON, duplex
-
Both simplex and duplex copy modes are available for body sets.
-
Specify whether to be blank, simplex-printed, or duplex-printed for covers. Covers can also be trimmed
to match with the thickness of the body set.
-
The binding direction can be either left or right.
-
The low power/shut off mode activates at the same time on the main body and Perfect Binder PB-503 .
-
Paper tray
– Body: main body tray (tray 1, tray 2), Paper Feeder Unit PF-703 / PF-706 (trays 3 to 8)
– Cover: main body tray (tray 1, tray 2), Paper Feeder Unit PF-703 / PF-706 (trays 3 to 8), Perfect Binder
PB-503 cover tray (cover print unable), the upper/lower tray of the post inserter of Folding Unit FD-503
(cover print unable), Large Capacity Post Inserter PI-PFU (cover print unable), Post Inserter PI-502
(cover print unable)
-
See Section 3 for details of available sizes for body.
-
Paper size for cover
– Set the paper of the body length (head to foot) and of the body width
e
2 + body thickness (1 mm or
more) + 5 mm or more of trimming width if Trimming mode is specified.
– See Section 3 for the maximum size available in each tray.
-
Paper weight
– Body: 18 to 24 lb Bond
Front cov-
er original Body set original Back cover origi-
nal
Body set output Cover print
Front cover orig-
inal Body set original Back cover orig-
inal
Body set output Cover print